Table of Contents
Advertisement
Nozzle Selection
The nozzles supplied with the pressure washer have specific spray patterns designed to
clean different surfaces. Using the incorrect nozzle can damage surfaces. Refer to the table
below to select the correct nozzle before using the pressure washer. NOTE: The selection
of nozzles included may vary with pressure washer models.
5-N-1
Color
(if equipped)
Red
0
HIGH
PRESSURE
Yellow
15
HIGH
PRESSURE
Green
25
HIGH
PRESSURE
White
40
HIGH
PRESSURE
Black
SOAP
LOW
PRESSURE
High-pressure spray can damage plants and other surfaces. To avoid causing damage,
cover plants before spraying near them, refer to the Nozzle Selection table in this manual
for correct nozzle selection, and test surfaces before spraying to make sure they are
strong enough to withstand high-pressure spray.
Nozzle Installation
If the engine is running, make sure the trigger lock is
in the locked position before removing and installing
nozzles.
To place a nozzle into the spray wand, pull the quick-
connect coupler back, insert the nozzle, then release
the coupler allowing it to snap back in place. Once
installed, pull on the nozzle to make sure it secure.
Page 12
NOZZLES
Spray
Pattern
0°
O
15°
O
25°
O
40°
O
Soap
NOTICE
Uses
Spot cleaning
hard, unpainted
surfaces and
high-reach
areas
Intense
cleaning of
and brick walkways, unpainted
unpainted
surfaces
Standard
cleaning
nozzle for most
applications
Cleaning
painted or
delicate
surfaces
Applies
cleaning
solutions
SPRAY DAMAGE
Surfaces
Unpainted metal and concrete
DO NOT use on wood.
Grills, driveways, concrete
brick and stucco
Yard tools, sidewalks, lawn
furniture, unpainted siding,
stucco, gutters, eaves,
concrete, and brick surfaces
Auto, truck, RV, marine, wood,
painted brick, painted stucco,
vinyl, and painted siding
Safe on all surfaces. Always
verify compatibility of cleaning
solution(s) prior to use.
Advertisement
Table of Contents
