Sonance SONAMP 875D SE Application Manual
  1. Manuals
  2. Brands
  3. Sonance Manuals
  4. Amplifier
  5. Sonamp 875D SE
  6. Application manual
Sonance SONAMP 875D SE Application Manual

Sonance SONAMP 875D SE Application Manual

Crestron module v2
Hide thumbs Also See for SONAMP 875D SE:
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Sonance SONAMP 875 Crestron Module V2
This module allows a Sonance SONAMP 875 amplifier to be controlled by any X-Generation or
2-series Crestron control processor
NOTE: The amplifier must be properly configured to enable RS-232 control. Refer to
the Amplifier's Instruction Manual for specific instructions. The amplifier's power
switch must be in the "On" position and the "A.C. On" indicator illuminated for the
amplifier to be controlled or monitored.

Application Guide

Description

Supported Processors

(no compact flash support required)
Any X-Generation or 2-Series Crestron Processor

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SONAMP 875D SE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sonance SONAMP 875D SE

Summary of Contents for Sonance SONAMP 875D SE

  • Page 1: Application Guide

    Sonance SONAMP 875 Crestron Module V2 This module allows a Sonance SONAMP 875 amplifier to be controlled by any X-Generation or 2-series Crestron control processor NOTE: The amplifier must be properly configured to enable RS-232 control. Refer to the Amplifier’s Instruction Manual for specific instructions. The amplifier’s power switch must be in the “On”...
  • Page 2 This module provides control for four zones (consisting of a total of eight individual channels) on the Sonance SONAMP 875, including power, mute, BBE and feedback for fault indication, front panel trim pot levels, and audio and voltage trigger input status.

  • Page 4: Digital Inputs

    [global_volume_up] ... Pulse to increment the volume in all zones by one unit; [global_volume_down] ... Pulse to decrement the volume in all zones by one [poll_all] ... Pulse to poll the amplifier for the status of all settings. Signal & Parameter Descriptions units specified in the volume down command repeatedly (speed...

  • Page 5: Analog Inputs

    ANALOG INPUTS [zoneX_volume_slider] ... Full range (0-100%) input to set the volume of the [channelX_volume_slider]... Full range (0-100%) input to set the volume of the SERIAL INPUTS amplifier_rx$ ... Tie to the RX$ line of the RS-232 port symbol. DIGITAL OUTPUTS [zoneX_power_on_fb] ...

  • Page 6: Revision History

    Contents The distribution package for this module should include: Sonance_875_Amplifier_v2.umc ... Crestron User Module for controlling SONAMP 875 Sonance_875_feedback_processor_v2.usp ... SIMPL+ file used within the amplifier module Sonance_875_feedback_processor_v2.ush ... SIMPL+ header file Sonance_875D_v2.vtp ... Demo XPanel touchpanel file Sonance_875_demo_v2.smw ... Demo program for Pro2 processor Sonance_875_module_v2_Help.pdf ...

This manual is also suitable for:

Sonamp 875

Table of Contents