Samsung WA10M512 Series User Manual page 22

Table of Contents

Before you start

With the Child Lock enabled

•

You can still manipulate on the control panel while the door is closed. If you open the

door, an information code (CL, dC) appears with an alarm. Then, the machine starts forced

draining after 30 seconds in order to prevent infant or child accidents such as drowning.

•

Only when water supply is complete, the Child Lock becomes active.

•

If the door leaves open for 30 seconds with the tub containing water, the machine drains

the water with the "CL" code, which you cannot stop.

•

To add detergent or more laundry in the tub, or to change the cycle settings, you must

first deactivate the Child Lock.

WARNING

If you open the door with the Child Lock enabled, the machine starts forced draining to

prevent accidents such as drowning.

NOTE

The Child Lock remains active after you power off the machine. You cannot deactivate the

Child Lock as long as the "CL" code appears on the display. But, you can deactivate when the

dC code appears by holding down two buttons simultaneously.

22 English

WA5100M_DC68-03777E-00_EN.indd 22

2/12/2018 3:30:06 PM

Table of Contents