Table of Contents
Advertisement
Installation
C
16 English
WA5100M_DC68-03777E-00_EN.indd 16
WA5100M_DC68-03777E-00_EN.indd 16
C
D
2. Use a Philips screwdriver to loosen four
screws on the adaptor.
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
6. While holding down part (D), connect the
water hose to the adaptor. Then, release
part (D). The hose fits into the adaptor
with a clicking sound.
2/12/2018 3:30:03 PM
2/12/2018 3:30:03 PM
Advertisement
Table of Contents
