This section gives step-by-step instructions on using your PC to access the Z3Cam-4K user interface. Here you’ll be able to change the settings to fit your video streaming needs. In addition to the Z3Cam-4K, a Windows PC, a 12V power supply and an Ethernet cable are required.
Z3Cam-4K Software Update Instructions DOC-USR-0105-01 (5) Click on the Z3Cam-4K entry in the window to select it. This will cause the Edit Device, Open Device and Flash LEDs buttons to activate. Figure 2 ZFinder with the Z3Cam-4K Selected (6) Click on Open Device. An internet browser window is opened in your default web browser (for best results, Firefox or Chrome are recommended) and the user interface appears with the Channel 1 configuration (CH1) tab open.
(5) Click Upload and Update. A progress message will appear. Once update of firmware is completed you will be returned to the main menu. ___________________________________________________________________________________________ Z3 Technology, LLC ♦ 100 N 8 ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702...