Page 2
Figure 1 Thermal Pad Placement on Silver Heat Sink ..............3 Figure 2 Assembling the FCB-ER8300 in the Enclosure Bottom ............4 Figure 3 Installing the Enclosure Top ..................5 Figure 4 Fully Assembled Z3Cam-4K ..................5 ___________________________________________________________________________________________ Z3 Technology, LLC ♦ 100 N 8...
Page 3
Z3Cam-4K Camera Installation Instructions DOC-USR-0106-01 1.0 OVERVIEW If you will be providing your own Sony FCB-ER8300 4K camera block for a full Z3Cam-4K unit, you have received a partially assembled system and will need to complete final assembly per the following instructions.
Page 4
(2) Connect the KEL ribbon cable to the Sony FCB-ER8300 camera. (3) Connect the other end of the KEL ribbon cable to the PCB. WARNING: ONLY USE THE CORRECT KEL RIBBON CABLE PROVIDED BY Z3 TECHNOLOGY. Using an incorrect cable can permanently damage the camera body.
Page 5
Figure 3 Installing the Enclosure Top Figure 4 Fully Assembled Z3Cam-4K (3) If desired, attach four rubber feet to the bottom of the enclosure. ___________________________________________________________________________________________ Z3 Technology, LLC ♦ 100 N 8 ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702...
Need help?
Do you have a question about the Z3Cam-4K and is the answer not in the manual?
Questions and answers