Connecting The Receiver - Sirius Satellite Radio Starmate Replay ST2 User And Installation Manual

Satellite radio plug and play receiver
Hide thumbs Also See for Starmate Replay ST2:
Table of Contents

Advertisement

Double check that the location of the antenna and
rubber antenna cable cover/tail are correct, and
continue to press firmly down on rubber antenna
cable cover/tail for another 30 seconds.
RUBBER ANTENNA
CABLE COVER/TAIL
VEHICLE
MOUNTING SURFACE
Note: At room temperature (68 degrees), maximum
adhesion usually occurs within 72 hours. During this
period, avoid car washes and other contact with the
antenna and rubber antenna cable cover/tail.
12

Connecting the Receiver

Connect the antenna and cigarette lighter power
adapter to the Receiver to complete the installation.
The illustration below shows the location of the
antenna and power connectors on the Receiver.
ANTENNA
FM OUT
AUDIO OUT
POWER
Plug the cigarette lighter power adapter cord into
your vehicle's cigarette lighter, and turn the Receiver
On by pressing the power button. Once you have
verified that Receiver has powered on, you can
proceed with activating your SIRIUS subscription.
ST2 Starmate Replay User and Installation Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents