installation
Remove the screw and stop block from the
bottom of the upper door and move it to the
opposite side. Remove also the door stopper
and keep it for future use. For the opposite side,
use the door stopper for left side. Screw tightly.
Door stopper has left and right side.
The door stopper packed as an
accessory is for the left side.
3. Remove the middle hinge. Lift the lower
door and place it on a padded surface to
prevent from being scratched.
4. Remove the screw and stop block from the
bottom of the lower door and move it to
the opposite side. Remove also the door
stopper and keep it for future use. For the
opposite side, use the door stopper for left
side. Screw tightly.
Door stopper has left and right side.
The door stopper packed as an
accessory is for the left side.
5. Lay down the unit. Remove both levelling
feet, levelling feet fix board and bottom
hinge. Swap the position of the levelling feet
fix board with the bottom hinge.
9