Table of Contents
Advertisement
installation
6. On the bottom hinge, move the position
of the bottom hinge pin to the other hole.
Tighten the pin securely.
7. Screw the levelling feet fix board, bottom
hinge and levelling feet tightly on their new
position.
8. Stand the unit. Remove the middle hinge
hole covers and swap their position with the
middle hinge. Reverse the middle hinge.
9. Place the bottom hole of the lower door onto
the bottom hinge pin. Insert the middle hinge
pin into the upper hole of the lower door.
Tighten the pin securely. Screw the middle
hinge tightly. Cover the remaining holes with
the hole covers.
• Ensure the lower door is aligned
horizontally and vertically, so that the
seals are closed on all sides before
finally tightening the pin.
10
Advertisement
Table of Contents
