Table of Contents
Advertisement
before using the water dispenser
Before using the water dispenser, clean the water tank first.
1. Take out the middle door shelf.
2. Take out the water tank by gripping it tightly on both sides,
then keep pulling it upward and downward with some force
until removed.
3. Take off the water tank cover, and wash the water tank, valve
and its cover. After washing, drain the water from inside the
tank and replace the cover.
4. Insert the water tank valve into the water dispenser
hole first.
Be careful not to press on the tank valve.
5. Fit the water tank along the guides on the door. Press down on both sides of the water tank.
6. When a click is heard, that means the installation is completed.
7. Replace the middle door shelf on top of the water tank.
Tank valve
Dispenser hole
14
Guide
Advertisement
Table of Contents
