Samsung QN90A E-Manual page 120

Setting the clock manually
Settings General
When Clock Mode is set to Manual, you can directly enter the current date and time. Select the
using the directional buttons on the remote control. When power is cut off and then supplied, the settings for
and Time are reset to deactivate the
Using the sleep timer
Settings General
You can use this function to automatically shut off the TV after a pre-set period of time. You can set the sleep timer
for up to 180 minutes after which it will turn off the TV.
This function may not be supported in some viewing modes.
Turning on the TV using the on timer
Settings General
You can set On Timer to turn on the TV automatically at a specific time.
been set. It is also available when
To use this function, first set the
This function may not be supported in some viewing modes.
This function may not be supported depending on the model or geographical area.
Turning off the TV using the off timer
Settings General
You can set Off Timer to shut off the TV automatically at a specific time.
been set.
To use this function, first set the
This function may not be supported in some viewing modes.
This function may not be supported depending on the model or geographical area.
System Manager
On Timer. When their settings are assigned again, the
System Manager
System Manager
Clock Mode is set to Auto, and the network or broadcast TV tuner is connected.
Clock ( Settings
System Manager
Clock ( Settings
- 120 -
Time Clock Clock Mode
Time Sleep Timer
Time On Timer
On Timer
General System Manager
Time Off Timer
Off Timer
General System Manager
Manual
Date and
On Timer is activated.
is only available if the Clock
Time Clock).
is only available if the
Time Clock).
Time by
Date
has
Clock has