5.
Insert the T-bolts removed in Step 1 through the handle brackets and lower
handle and tighten securely to secure the handle in place. See Figure 4.
Attaching The Handle (Model 247.378150)
1.
Remove any packing material which may be between upper and lower
handles.
a.
Remove wing nuts and carriage bolts handle as shown in Figure 5.
Do not loosen or remove adjacent hex head screws.
a
Figure 4
a
Figure 5
ASSEMBLY
b.
While stabilizing mower so it doesn't move, pivot upper handle up as
shown in Figure 6. Do not crimp cable while lifting the handle up.
2.
Remove T-bolts from the handle brackets as shown in Figure 7.
8
b
Figure 6
Figure 7