Craftsman Pro 247.37815 Series Operator's Manual page 12

Handle Pitch (If Equipped)
For convenience of operation, you may adjust the pitch of the handle as follows:
3. Remove wing nuts and carriage bolts from handle. See Figure 17.
4. Position the handle in one of the three positions that is most comfortable.
See Figure 17 inset.
5. Secure into position with wing nuts and carriage bolts removed in Step 1.
ADJUSTMENTS
Figure 17
Drive Control (If Equipped)
The adjustment wheel is located in the drive control handle housing and is used
to tighten or loosen the drive belt. You will need to adjust the drive control if the
mower does not propel itself with the drive control engaged or if the mower's
wheels hesitate with the drive control engaged. If either of these conditions occur,
rotate adjustment wheel clockwise to tighten cable or counterclockwise to loosen
the cable. See Figure 18 or Figure 19.
12
Tighten
Loosen
Figure 18
Loosen
Tighten
Figure 19