Hardware Features; Access Point Views, Ports, And Connectors; Connectors And Ports On The Ap - Cisco Catalyst Wireless 9166D1 Hardware Installation Manual

Hardware Features

This chapter describes the hardware features of Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point and
contains the following sections:
•
•

Access Point Views, Ports, and Connectors

Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point has multiple options that you can use to power the
AP. For information about connectors and ports for the AP models, see
page
Environment Sensors
The AP has inbuilt environment sensors that work with Cisco Spaces. There are two visible vents at the top
of the AP. The sensors measure the following environment parameters:
• Ambient air temperature sensor
• Air quality sensor (Total Volatile Organic Compounds [TVOC])
• Relative humidity sensor
• Accelerometer
Note

Connectors and Ports on the AP

The following figures show the available ports on the AP:
Access Point Views, Ports, and Connectors, on page 7
CW9166D1 (Integrated Directional Antenna) Radiation Patterns, on page 9
7.
For more information on how to configure the AP sensor in Cisco Spaces, see the
the Cisco Spaces: IoT Services Configuration Guide.
Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point Hardware Installation Guide
2
C H A P T E R
Connectors and Ports on the AP, on
AP as a Sensor section of
7