Cisco Catalyst Wireless 9166D1 Hardware Installation Manual page 24

Cisco Orderable Accessories
Mounting Brackets
CW-MNT-ART2-00
AIR-AP-BRACKET-1=
AIR-AP-T-RAIL-F=
AIR-AP-T-RAIL-R=
AIR-CHNL-ADAPTER=
• Power injectors when Power over Ethernet (PoE) is not available
Power Supply
AIR-PWRINJ7=
AIR-PWRINJ6=
MA-INJ-6-x
Cisco Catalyst Wireless 9166D1 Wi-Fi 6E Access Point Hardware Installation Guide
16
Description
Articulating wall/pole mount kit. This kit should be used along
with AIR-AP-BRACKET-2
For low-profile non-pivoting installations
Flush ceiling grid clip
Recessed ceiling grid clip
T-RAIL channel adapter
Description
Mid-span power injector AIR-PWRINJ7= when (PoE) is not
available
Power specifications: 50W, 56VDC
For more information, see the
A 802.3at power injector when PoE is not available
Power Specifications: 30W, 55VDC
For more information, see the
Meraki 802.3bt PoE injector
Power Specifications: 60W, 55VDC
For more information, see the
Unpacking Your Access Point
power injector data sheet.
power injector data sheet.
power injector data sheet.