Hardware Features; Access Point Views, Ports, And Connectors; Connectors And Ports On The Ap - Cisco Catalyst 9166 Series Hardware Installation Manual

Hardware Features

This chapter describes the hardware features of Cisco Catalyst 9166 Series Wi-Fi 6E Access Point and contains
the following sections:
•
•

Access Point Views, Ports, and Connectors

Cisco Catalyst 9166 Series Wi-Fi 6E Access Point has multiple options that you can use to power the AP.
For information about connectors and ports for the AP models, see
7.
Environment Sensors
The AP has inbuilt environment sensors that work with Cisco DNA Spaces. There are two visible vents at
the top of the AP. The sensors measure the following environment parameters:
• Ambient air temperature sensor
• Air quality sensor (Total Volatile Organic Compounds [TVOC])
• Relative humidity sensor
Note

Connectors and Ports on the AP

The following figures show the available ports on the AP:
Access Point Views, Ports, and Connectors, on page 7
CW9166I (Internal Antenna) Radiation Patterns, on page 9
For more information on how to configure the AP sensor in DNA Space, see the
of the Cisco DNA Spaces: IoT Services Configuration Guide.
Cisco Catalyst 9166 Series Wi-Fi 6E Access Point Hardware Installation Guide
2
C H A P T E R
Connectors and Ports on the AP, on page
AP as a Sensor section
7