Table of Contents
Advertisement
Every 3 months: Check reflectors, lights, and seat/seat post for excess wear or damage. Check the frame, fork,
handlebars, and stem for cracks and damage. Lubricate handlebar stem and seat post. Check each pedal to
make sure they are not loose and lubricated. Make sure there is no rust or kinks in the control cables or brake
housing. Check your wheel rims for excessive wear and dents and for loose or damaged spokes. Check your
tires for tire inflation and excessive wear, cuts, or abrasions. Check crankset and bottom bracket. Inspect and
lubricate brake levers. Lubricate bottom bracket bearings, wheel bearings. Check each pedal arm to be sure
they are tight.
If you are uncomfortable with any service or general maintenance to your bike, please visit your local bike
shop for service and maintenance.
Take your bike to your local bike shop for inspection after 30 days or if you think something is wrong with your
bike take it in immediately.
Your bike and components are subject to wear and fatigue. If a component's life cycle is exceeded, it can
suddenly fail which may cause serious injury or death.
Take your bike to your local bike shop for repair and service if you notice any of the following or any other
wear and fatigue.
IF ANY SIGNS OF WEAR, DAMAGE OR FATIGUE, DO NOT RIDE YOUR BIKE. TAKE YOUR BIKE IMMEDIATELY TO
A LOCAL BIKE SHOP FOR REAIR AND SERVICE!
Replacement parts can be purchased by contacting Rambo bikes at: rambobikes.com.
A list of Certified Repair Centers can also be found at:
rambobikes.com/dealer-locator
22
Advertisement
Table of Contents
