Table of Contents
Advertisement
After the pedals are installed flip the bike over onto the wheels and be sure to check that the handlebars are
aligned with the front tire. Then tighten both sides of the stem to the fork using a 4mm Allen wrench, tighten
to 45 IN-LBS or 5 Nm.
Then Check the tires for proper air pressure, the minimum and maximum air pressure should be between
10psi-25psi.
Once the bike is assembled, fully charge the battery, and install the battery into the bike frame being sure to
insert the key and turn clockwise to open the battery latching system.
14
Advertisement
Table of Contents
