RAMBO R1000X2M-FF-BFD Manual page 18

Installing/Removing Battery:
Insert the key into the keyhole, then turn the key clockwise as indicated on the keyhole, this will unlock the
battery latch and allow the battery to drop down to the second safety latch. Then turn the safety latch on the
battery and lower the battery out of the frame. When installing the battery, be sure the battery clicks twice
into the frame and the battery is sitting flush with the frame. The first click is the safety latch, and the second
click is the lock system for the battery.
Charging:
Do not charge the battery at temperatures below freezing and above 113 Fahrenheit (45 Celsius)
ONLY USE CHARGER THAT IS SUPPLIED WITH THE BIKE TO CHARGE THE BATTERY, DO NOT USE ANY OTHER
CHARGER.
WARNING: DO NOT CHARGE BATTERY FOR LONGER THAN 12 HOURS
WARNING: ALWAYS CHARGE IN A DRY AREA
The battery can be charged while on the bike, make sure to turn the bike off before charging the battery
and/or removing the battery.
Install the charging plug into the battery charging port, as shown below.
18