Gravely ZT Owner's/Operator's Manual page 11

Mower Lift Pedal (Figure 5)
Raises and lowers mower deck.
2
1. Adjustment Pin
NOTE: The adjustment pin is used to set the
height of the mower deck. See
SPECIFICATIONS on page 27 for cutting
height dimensions.
7 6 5 4 3 2
Press mower lift pedal and install adjustment
pin in the desired adjustment hole.
NOTE: Adjusting the seat
further forward will help
increase the leverage in lifting
the mower deck (see Adjusting
Seat on page 11).
Axle Locks (915044, 046, 048, 050)
(Figure 6)
NOTE: The unit comes shipped with the front
axle in the lockout position.
If a pivoting front axle is needed: Remove
axle lock hardware from lockout position and
install axle lock hardware in pivoting position
on both sides of front axle.
NOTE: To lock front axle, install axle lock
hardware in the lockout position on both sides
of the axle.
1
2. Mower Lift
Pedal
3. Adjustment Hole
Figure 5
3
1
OE0060
1. Front Axle
2. Pivoting
Position
1
Adjusting Seat
Lift adjustment lever and slide seat forward or
backward to the desired position.
2
1. Seat
GB - 11
3 4
2
3. Lockout
Position
4. Axle Lock
Hardware
Figure 6
2. Adjustment
Lever
Figure 7
OE0240
1
OE0150