Subscribe to Our Youtube Channel
Related Manuals for mastro ABC0001
Summary of Contents for mastro ABC0001
- Page 1 049_03 04/2006 Instructions for installation, use and maintenance GAS FRYERS APPLIANCES WITH MECHANICAL VALVE ABC0001 • ABC0002 ACC0001 • ACC0002 ACC0006 • ACC0007 ADC0001 • ADC0002 AEC0007 • AEC0008...
- Page 2 INDEX Dimensions Running the appliance on other types page of gas page Data of appliances Replacing the main burner nozzle Adjusting the pilot burner Adjusting the primary air Technical data Maintenance Operating instructions Replacing parts Construction, equipment installed Valve and safety devices Safety termostat Assembly Burner...
- Page 3 Dimensions 1/2"GC 1/2"GC ABC00001 ABC00002 SKF 10GM 1/2"GC 1/2"GC ACC00007 ACC00006 1/2"GC 1/2"GC 1/2"GC ACC00002 ACC00001 049 - 03 - Gas fryers...
- Page 4 Dimensions ADC00001 ADC00002 049 - 03 - Gas fryers...
- Page 5 Dimensions AEC00007 AEC00008 049 - 03 - Gas fryers...
-
Page 6: Characteristics Of The Appliances
2 - CHARACTERISTICS OF THE APPLIANCES The instructions contained in this manual apply to our Gas deep fat control panel. It contains all necessary reference data such as the fryer in the II2H3+ category (see table on page 7). name of the manufacturer, input pressure, gas type setting, etc. The data plate is located on the front of the appliance and on the CAT/KAT GAS/GAZ... - Page 7 TABLE 1 ABC00001 - ACC00001 ABC00002 - ACC00002 Model ACC00006 - ADC00001 ACC00007 - ADC00002 AEC00007 AEC00008 Category II2H3+ Construction type Air necessary for combustion Nominal thermal power 13.8 Minimum thermal power Connection pressure Methane gas 2H 20 mbar Liquid gas 3+ G30/G31 28/37 mbar Gas connection values...
-
Page 8: Installation
OPERATING INSTRUCTIONS Construction, equipment installed Attention! and safety devices When installing the ABC00001 and ABC00002 Robust steel frame, with 4 legs (adjustable in hei- models, make sure that the front edge of the ap- ght). pliance is at a maximum distance of 100 mm from 18/10 chrome-nickel steel outer panelling and tanks. -
Page 9: Commissioning The Appliance
Installation procedure Gas venting To level the appliance correctly, adjust the height of These appliances are A construction type, thus no the four legs. gas venting is required. For advice on ventilating the premises where the Gas connection appliance is installed, observe current regulations. T h e R 1 / 2 ”... - Page 10 The heat value can be obtained from your local Gas - Draw up a servicing and maintenance contract. Board. To obtain the nominal capacity in relation to the no- Note for the installer minal pressure, consult table (1) (Gas Flow Setting). - Explain and demonstrate to the user how the machine works according to the instructions and WARNING...
-
Page 11: Replacing Parts
Adjusting the pilot burner (Fig. 1) REPLACING PARTS To get at the pilot burner, remove the control panel (as previously described). Unscrew nut (34) and All parts must be replaced by authorised techni- using a screwdriver adjust the by-pass. For use with cians only! LPG, the adjusting screw must be fully screwed To replace the following parts, remove the control... - Page 12 ACC00001 ACC00002 ABC00002 ABC00001 ACC00007 ACC00006 ADC00001 ADC00002 AEC00007 AEC00008 049 - 03 - Gas fryers...
-
Page 13: Using The Appliance
USING THE APPLIANCE Warning! Lighting the main burner of the tank - Beware of inexpert handling! To ligth the main burner, turn the knob to the posi- - Old and dirty oil or frying fat can represent a real fi- tion required. - Page 14 Floor-standing version TAKING CARE OF THE APPLIANCE FREQUENCY OF MAINTENANCE Check that the standard container is available for emptying procedure. The container should be pla- Warning! ced correctly on the proper guides and fully inser- ted. Never clean the appliance with jets of water, It is advisable to filter frying oil and fat daily and to whether direct or pressurised.
- Page 15 WARNING DUE TO ITS POLICY OF CONTINUAL PRODUCT IMPRO- VEMENT, THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSI- BLE IF THE INSTRUCTIONS CONTAINED IN THIS MA- NUAL ARE NOT OBSERVED. 049 - 03 - Gas fryers...
Need help?
Do you have a question about the ABC0001 and is the answer not in the manual?
Questions and answers