Advertisement
Water valve connections for the Detergent Drawer
It is normal for some water to remain in Detergent Drawer
after it completes washing. Bleach is usually flushed out
into the tub at the beginning of the washing. Also, its com-
partment is washed again during the following rinse cycle,
removing any remnants.
Laundry Touch Up Paints
Location considerations
Do not install your washer in areas where water may
freeze, since your washer will
water in its water valve, pump, and hose areas. This
can cause
damage the belts, the pump, hoses and
other components. Operating temperature should be
above 60°F/16°C.
The unit sometimes will pause during Sanitize, or Pure Cycle, wash modes and appear not to be functional. The Sani-
tize and Pure Cycle wash cycles have target temperatures to assure washer performance. If the water temperature
doesn't meet the target temperature during the wash cycle, the washer will automatically add extra time to allow the
heater to bring the water up to the programmed, or target temperature. In this stage, the displayed time will pause and
hold until the heating operation has been completed. It is at this point that the customer may feel that operation has
stopped. (The maximum added programmed time is 30 minutes)
always maintain some
NOTICE
Items Packed With Washer
BOLT-SPANER (10-13mm Wrench) DC60-40146A
ASSY HOSE WATER DC97-15691A
ASSY HOSE WATER DC97-15692A
MANUAL-BOOK DC68-02535A
CAP-FIXER DC67-00307A
HOSE-HANGER DC62-10278A
Stacking Kit :
(Model No : SK-3A1/XAA, SK-4A/
XAA, SK-5A/XAA)
Samsung washers and dryers can be stacked to maxi-
mize usable space. An optional stacking kit is avail-
able for purchase from your Samsung retailer
When using non-HE detergents, or using too much deter-
gent for the water hardness and soil level of the clothing,
over sudsing will occur. When this happens there will be
leaks out of the detergent drawer and door. Please ad-
vise consumer of proper detergent usage.
Advertisement
