Brother 885-V94 Operation Manual page 30

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
a Press (Needle position button) once or
twice to raise the needle, and then raise the
presser foot lever.
a Needle position button
b Presser foot lever
b Turn off the sewing machine.
c Slide the bobbin cover latch to the right.
a
a Bobbin cover
b Latch
X
The bobbin cover opens.
d Remove the bobbin cover.
e Hold the bobbin with your right hand and hold
the end of the thread with your left hand.
• Be careful not to drop the bobbin.
28
a
b
b
f Insert the bobbin into the bobbin case with
your right hand.
• Be sure to insert the bobbin correctly.
CAUTION
● Be sure to insert the bobbin and depress it
to the bottom with your finger.
Otherwise, the thread may break or the
thread tension will be incorrect.
● Be sure to thread the machine as
indicated. Otherwise, the thread may
break or the thread tension will be
incorrect.
g
Lightly hold down the bobbin with your right
hand, and then guide the thread as shown with
your left hand.
h Pass the thread through the slot as shown, and
then pull the thread out toward the front.
a
a Cutter
X
The cutter cuts the thread.