Interface Specifications; Environmental Requirements - Watchguard XTM 810 Hardware Manual

Interface Specifications

Network interfaces
XTM 810, 820, 830
Network interfaces
XTM 830-F
I/O interfaces

Environmental Requirements

To safely install your XTM 8 Series device, we recommend that you:

Install it in a network rack

Put it in a secure area, such as a locked room, to keep the device from people who do not have
permission to use it

Connect it to a conditioned power supply to prevent damage from sudden power changes
Other environmental requirements:
Operating temperature
Operating relative humidity
Non-operating temperature
Non-operating relative humidity
Hardware Guide
10x GbE Copper RJ45, 1000Base-T, 100Base-TX, or 10 Base-T (10/100/1000Mbps)
 6x GbE Copper RJ45, 1000Base-T, 100Base-TX, or 10 Base-T (10/100/
1000Mbps)
 4x GbE SFP
Includes 4x1000BaseSX Optical Transceivers
o
850 nm Vertical Cavity Surface Emitting Laser (VCSEL)
o
LC-Duplex Fiber Connector
o
 2 USB
 1 DB9 serial
0 – 45°C (32 – 113°F)
10% - 85% Non-condensing
–40 – 70°C (–40 – 158°F)
10% – 95% Non-condensing
Hardware Specifications
3