Table Of Contents - CODEL DCEM2000 Technical Manual

Technical Manual
Contents
1. CODEL DCEM2000 Analyser - Introduction
1.1. Foreword
1.2. DCEM2000 Basic Principles
1.3. User Interface
1.4. Analogue and Logic Outputs
1.5. CDC Serial Port - for use with the CODEL IEM system
2. Overview of the CODEL Model DCEM2000 Dust Monitor
2.1. Introduction
2.2. Transceiver Units
2.3. Signal Processor Unit (SPU)
2.4. Station Control Unit (SCU)
3. Measurement Principle
3.1. Window Compensation
4. Specification
5. Installation
5.1. Equipment List
5.2. Siting the Equipment
5.3. Installation
5.3.1. Air Purges
5.3.2. Ball Valves
5.3.3. Transceivers
5.3.4. Signal Processor Unit
6. Electrical Connections
6.1. Installation and Connection of Cables
6.2. Connection Schedule
7. Commissioning
7.1. Pre-Commissioning Checks
7.2. Install SmartCOM Software
7.3. Setting Instrument Gains
7.3.1. Alignment
7.3.2. Detector levels
7.3.3. Zero and span calibration
7.3.4. Transmissivities
7.3.5. Output Data
8. Routine Maintenance
9. Fault Finding
10. Table of Figures
OPS.086 Issue : B Rev. : 1 Date : 11/8/10
CODEL
Doc. i/d : 0086/6 Ref. : 080047
1
1
2
2
2
2
3
3
3
3
4
5
6
8
9
9
9
9
10
11
11
12
13
13
13
16
16
16
16
16
18
19
21
21
23
24
25