Ceiling Bracket - Hunter Maribel Series Manual

Ceiling Bracket

OFF
Remove all four mounting isolators.
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
Mounting
Isolator
Tapered
Mounting
Holes
Align the tapered mounting holes in the
ceiling plate with the holes in the ceiling
bracket. Install the four ceiling plate
screws found in the
secure with the flange nuts using an 11/32"
wrench. Hold the ceiling bracket assembly
up to the outlet box and mark the screw
locations. To mount to support structure,
also mark the ceiling for drilling pilot holes.
5
MB012-01 • 01/07/14 • © Hunter Fan Company
Ceiling Plate
Ceiling
Screws Plate
Ceiling
Gasket
Plate
Flange
Nuts
Ceiling
Plate
Ceiling
t
Bracke
Install the ceiling plate gasket onto the
ceiling plate. The four holes in the ceiling
plate should lineup with the four posts in
hardware bag and
www.HunterFanInternational.com
Post
the gasket.
Refer to warning w.1 on pg. 2