Table of Contents
Advertisement
Wiring
Green/Yellow Stripe
Refer to CAUTION c.1 on pg. 2
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then twist
clockwise until tight.
Using an orange wire
connector from
the
hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
11
MB012-01 • 01/07/14 • © Hunter Fan Company
www.HunterFanInternational.com
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
Using the orange
wire connectors from
the
hardware bag,
connect the black wire
(ungrounded) from the
ceiling to the black and
the blue wires from the
fan. Connect the white
wire (grounded) from
the ceiling to the white
wire from the fan.
Advertisement
Table of Contents
