Storage And Transport; Disposal And Recycling - FERREX FBGS240E1 User Manual

Wear ear-muffs.
Excessive noise can result in a loss of hearing.
The above-mentioned noise emission values were measured in accordance with a
standardised test procedure and can be used to compare one power tool with an-
other.
The specified device emissions values can also be used for an initial estimation of the
load.
Warning:
• The noise emission values can vary from the specified values during the actual use
of the electric tool, depending on the type and the manner in which the electric tool
is used, and in particular the type of workpiece being processed.
• Try to keep the stress as low as possible. For example: Limit working time. In doing
so, all parts of the operating cycle must be taken into account (such as times in
which the electric tool is switched off or times in which it is switched on, but is not
running under a load).

Storage and transport

Store the equipment and accessories out of children's reach in a dark and dry place at
above freezing temperature. The ideal storage temperature is between 5 and 30 °C.
Store the electric tool in its original packaging.
Grinding disks must be stored dry and upright and are not to be stacked.
m ATTENTION Unplug the machine!
The appliance must unconditionally be secured against falling or turning down dur-
ing transport.
The appliance can be lifted on the frame.

Disposal and recycling

The equipment is supplied in packaging to prevent it from being damaged in transit.
The raw materials in this packaging can be reused or recycled. The equipment and
its accessories are made of various types of material, such as metal and plastic. Never
place defective equipment in your household refuse. The equipment should be tak-
en to a suitable collection center for proper disposal. If you do not know the wherea-
bouts of such a collection point, you should ask in your local council offices.
Technical data/Storage and transport/Disposal and recycling Kapitelüberschrift
21