Overheating Protection; Cleaning; Storage - Powerfix Profi PHG 3000 B2 Operating Instructions Manual

Overheating protection

The appliance is fi tted with a temperature regulator controlled overheating protector.
Should the appliance become too hot internally, the heating element switches
itself off automatically. However, the fan continues to run, so that a rapid cooling
can be achieved. Once the appliance has cooled itself down, the heating ele-
ment switches back on automatically.
WARNING
As a general rule, overheating has a reason! It can mean a risk
of fi re!
► Check that the appliance can suffi ciently disburse the heat generated:
Is the appliance covered or is it too close to a wall or other obstacle?
Are the grilles on the front or back clear? Is the ventilator blocked?
► If possible, eliminate the problem or contact the Service Hotline
(see Chapter Service).
► Even if you cannot fi nd a cause, but the overheating protection triggers
a second time, you must return the appliance to Customer Services for
inspection or repair.

Cleaning

WARNING
Observe the following safety information to avoid risks and property damage:
► Only clean the appliance when it is switched off and cold.
IMPORTANT
Possible damage to the appliance.
Penetrating moisture can lead to the appliance becoming damaged.
► When you are cleaning the appliance ensure that no moisture can get
inside, so as to avoid irreparable damage to it.
■ Clean the housing exclusively with a soft damp cloth and a mild dishwashing liquid.
■ Remove dust deposits on the protective screen with a vacuum cleaner.

Storage

■ Disconnect the mains power plug if you do not intend to use the appliance for an
extended period of time.
■ Store the appliance in a dry environment.
PHG 3000 B2
GB
IE
9