Table of Contents
Advertisement
CLEANING & CARE
Rules to observe during navigation
•
Depending on the parts usage, keep some spare available, all parts suggest must
consult a local agent for factory authorised parts when servicing system.
•
Clean your kayak after a trip to prevent damage from sand, salt water or sun
exposure. Use a garden hose washing the kayak and a sponge and mild soap can
clean most dirt. Make sure the kayak is completely clean and dry before storing;
otherwise the kayak will be mouldy.
•
Do not use solvents to clean the kayak, solvents may damage material or plastic
components in the system. Store all kayak accessories in a dry storage location
with ventilation. Make sure that all parts are dry before storage.
•
You can store the kayak inflated or deflated.
Choose a dry and cool place to store the kayak.
-
Don't hang the kayak up.
-
Don't place any heavy or sharp objects on it.
-
Warning:
Certain household cleaning solvents, chemicals and other liquids (such as battery acid, oil
and gasoline) could damage the PVS fabric. In the event of spill or mishandling, you should
check for leaks and inspect for structural integrity.
Disassembly
1.
Remove all the accessories from the kayak: oars, repair-kit.
2.
Open all valves and deflate the kayak completely.
3.
Fold the kayak (make sure that the kayak is clean and dry. See the above
Maintenance and Storage chapter).
4.
Put kayak and air pump, oars into a carry bag for storage.
Advertisement
Table of Contents
