Settings - AEG FSE83800P User Manual

34 www.aeg.com
5.1 Consumption values
Programme
P1
P2
P5
P3
P6
P4
P8
P7
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of
the acoustic signal for end of
programme.
Water
1)
(l)
11
7 - 14
14 - 16
12.5-14.5
12 - 14
10
4
9 - 10
Energy
(kWh)
0.832
0.6 - 1.6
1.2 - 1.5
1.4-1.7
0.7 - 0.9
0.9
0.1
1.1 - 1.3
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
• The selection of the colour for
TimeBeam.
• The activation or deactivation of the
rinse aid empty notification.
• The level of rinse aid according to the
required dosage.
• The activation or the deactivation of
AirDry.
These settings will be saved until you
change them again.
Duration
(min)
232
40 - 170
160 - 180
170-190
82-92
30
14
230 - 250