Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wickes CPS18W.1
Summary of Contents for Wickes CPS18W.1
- Page 1 CORDLESS DETAIL SANDER 18V LITHIUM CPS18W.1 223744...
-
Page 2: Table Of Contents
CONTENTS GENERAL POWER TOOL SAFETY WARNINGS GENERAL SAFETY WARNINGS FOR BATTERY CHARGER COMPONENT LIST ACCESSORIES SYMBOLS TECHNICAL DATA NOISE INFORMATION OPERATING INSTRUCTIONS WORKING HINTS FOR YOUR SANDER MAINTENANCE TROUBLESHOOTING ENVIRONMENTAL PROTECTION DECLARATION OF CONFORMITY... -
Page 3: General Power Tool Safety Warnings
ORIGINAL INSTRUCTION GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings, 3. PERSONAL SAFETY a) Stay alert, watch what you are doing and use instructions, illustrations and specifications provided with this power tool. Failure to follow all common sense when operating a power tool. instructions listed below may result in electric shock, fire Do not use a power tool while you are tired and/or serious injury. - Page 4 GENERAL POWER TOOL SAFETY WARNINGS designated battery packs. Use of any other battery or remove the battery pack, if detachable, from packs may create a risk of injury and fire. the power tool before making any adjustments, changing accessories, or storing power tools. c) When battery pack is not in use, keep it away Such preventive safety measures reduce the risk of from other metal objects, like paper clips, coins,...
- Page 5 SAFETY WARNINGS FOR BATTERY PACK a) Do not dismantle, open or shred cells or battery pack. b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
-
Page 6: General Safety Warnings For Battery Charger
GENERAL SAFETY WARNINGS FOR BATTERY CHARGER WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. -
Page 7: Component List
COMPONENT LIST On/off switch Hook and Loop base Soft grip handle Finger pad Battery pack Lock lever for finger pad Battery pack release button Sanding paper x 3 (Also fitting for finger pad) Dust bag Charger Sanding plate Vacuum adapter... -
Page 8: Accessories
ACCESSORIES 1 hr charger (ACG118W3) 2.0 Ah Li-ion battery pack (ABP1820HW) Sanding sheets (60G, 80G, 120G) Finger sanding sheets (60G, 80G, 120G) Dust bag Vacuum adapter We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. SYMBOLS Li-ion battery. -
Page 9: Technical Data
TECHNICAL DATA Voltage No load speed 13000/min Base size 140*140*80mm Machine weight 1.07 kg Charger Protection class Charging time Charger Input 100-240V~50/60Hz, 55W Charger Output 20VDC 2.0A Battery capacity 2.0Ah Li-ion battery Battery Model ABP1820HW Charger Model ACG118W3 For additional battery technical data, refer to the rating plate on the battery pack. NOISE INFORMATION A weighted sound pressure : 75.6 dB(A) - Page 10 VIBRATION INFORMATION Vibration total values (triax vector sum) determined according to EN 62841: = 8.34 m/s² Vibration emission value Uncertainty K = 1.5 m/s² The declared vibration total value and the declared noise emission value have been measured in accordance with a standard test method and may be used for comparing one tool with another. The declared vibration total value and the declared noise emission value may also be used in a preliminary assessment of exposure.
-
Page 11: Operating Instructions
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. ASSEMBLY 1. FITTING THE SANDING PAPER (SEE FIG. A) WARNING: Always ensure that the sander is switched off and the battery pack is removed before making any adjustments. Remove any dust or dirt from the sanding plate, place the sanding paper directly onto the base plate. - Page 12 4. DUST EXTRACTION OUTLET (SEE FIG. D1, D2) Your sander is equipped with a vacuum adapter which can be connected to an external dust extraction. Using an external dust extractor will dramatically improve the performance of your sander. To attach the vacuum adapter, insert it into the dust outlet port fully.
- Page 13 6. SELECT THE RIGHT SAND PAPER Selecting the correct grit of sandpaper is an extremely important decision that will allow you to achieve the best quality sanding finish. Coarse grit (60G) will remove the most material and finer grit (120G) will give you the best finish in all sanding operations. The condition of the surface to be sanded will determine which grit will do the job. If the surface is rough: Start with coarse grit (60G) and sand until the surface is uniform. Then use medium to remove any scratches left by the coarse grit. Then use finer grit (120G) for finishing the surface.
- Page 14 3. TO REMOVE THE BATTERY PACK (SEE FIG. G1) Depress the battery pack release button firmly first and then slide the battery pack out from your tool. Fig. G1 4. TO INSTALL THE BATTERY PACK (SEE FIG. G2) Slide the fully charged battery pack onto the tool with sufficient force until it clicks into position.
- Page 15 2. FLUSH SANDING FACILITY (SEE FIG. I) Your sander can sand flush on three sides of the sanding plate which allows easy access to corners and edges. Fig. I 3. ORBITAL SANDING Your sander operates in small circular rotations which allows efficient material removal. Operate the sander in long sweeping movements across your workpiece and even across the grain. For a finer finish, always use a fine grain sandpaper and only move the sander in the direction of the grain and never across the grain. Do not allow the sander to remain in the same position otherwise you will remove material and create an uneven surface. 4.
-
Page 16: Working Hints For Your Sander
WORKING HINTS FOR YOUR SANDER 1. If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds. Always use sand paper that is suitable for the material you want to sand. -
Page 17: Troubleshooting
TROUBLESHOOTING Fault Cause Remedy Low efficiency in vacuuming Too much dust in the dust bag. Clean and empty the dust bag. The sander does not start up Battery depleted. Charge the battery. after switch on. Defective on/off switch. Contact the service centre. Defective motor. Contact the service centre. -
Page 18: Declaration Of Conformity
DECLARATION OF CONFORMITY Wickes Building Supplies Limited Declare that this product: CORDLESS DETAIL SANDER Description and SKU code: 223744 Complies with the following Directives and Regulations: 2006/42/EC, Machinery Directive 2014/30/EU, Electromagnetic Compatibility Directive 2011/65/EU & (EU)2015/863 (RoHS), Restriction of Hazardous Substances Directive 2014/35/EU, Low Voltage Directive and conforms to the following standards:... - Page 20 Customer Helpline 0345 2005409...