Lock The Card; Lock Upon Startup Of Sprint Pcs Connection Manager - Sierra Wireless AirCard 595 User Manual

When the card is locked, you cannot:
Make data connections (the GO button is unavailable).
Run the Activation Wizard.

Lock the Card

Warning: If you forget the lock code, you will not be able to use the card until you
receive assistance from Sprint.
To lock the Sprint Mobile Broadband Card immediately:
1. End any active connection. (You can lock the card only when Disconnected;
page 34.)
2. If Sprint PCS Connection Manager is not expanded, click
3. Click the icon.
4. In the Enter User Lock Code window, enter the lock code, and click OK.
When the card is locked, Sprint PCS Connection Manager displays "Device Locked,"
and the lock icon is now
Tip: You can also set the card to be locked upon startup of Sprint PCS Connection
Manager, as described next.

Lock Upon Startup of Sprint PCS Connection Manager

To set the Sprint Mobile Broadband Card to lock as soon as Sprint PCS Connection
Manager starts up:
1. End any active connection. (You can lock the card only when Disconnected;
page 34.)
2. If Sprint PCS Connection Manager is not expanded, click
3. Click the lock icon (
4. In the Enter User Lock Code window, enter the lock code, and select Relock
modem when program exits.
5. Click OK.
Note: This setting takes effect only after you exit and restart Sprint PCS
Connection Manager.
Section 3A: Your Sprint Mobile Broadband Card: The Basics
. The GO button is unavailable.
or , depending on the current lock status).
to expand it.
to expand it.
47