Technical Data - Reely 1:8 Nitro Buggy Generation-X LE 4WD RtR Operating Instructions Manual

16. Technical data

Scale ................................................................1:8
Receiver battery ..............................................5-cell NiMH battery pack (6.0 V rated voltage, 1300 mAh minimum
Drive ................................................................2-stroke combustion engine, 4.1 ccm, 2.2 kW (~2.99 PS)
Fuel type ..........................................................Methanol/oil-based fuel for RC model vehicles, 5% - 25%
Tank capacity ...................................................125 cm³
Chassis ............................................................Independent suspension, double wishbones
Dimensions (L x W x H) ...................................515 x 305 x 185 mm
Tyre dimensions (W x Ø) .................................42 x 115 mm
Wheel base ......................................................325 mm
Ground clearance ............................................42 mm
Weight .............................................................3600 g (without receiver battery/fuel)
The product dimensions and weight may vary slightly.
80
capacity) with BEC connection; not included, must be purchased
separately
All-wheel drive
Centrifugal clutch
Differential on the front and rear axle
Centre differential
Drive axles are mounted with ball bearings
nitromethane and 16% synthetic oil
Adjustable oil shock absorbers with coil springs
Adjustable front wheel toe
Adjustable front and rear wheel camber
Adjustable servo saver for the steering servo