1. Connect the
speaker cable
2. Install the battery.
3. Install the
base
cover.
4. Follow the procedure
after working inside your
computer.
Touchpad button board
Removing the touchpad button board
1. Follow the procedure in
before working inside your
computer.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the speaker.
1. Disconnect the touchpad button board cable from the touchpad module [1].
2. Remove the two (M2x2.5) screws that secures touchpad button board to the palmrest assembly [2].
3. Remove the touchpad button board from the palmrest assembly [3].
44
Removing and installing components