1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure
after working inside your
computer.
WWAN card
Removing the WWAN card
1. Follow the procedure in
before working inside your
computer.
2. Remove the
base
cover.
3. Remove the battery.
1. Remove the single (M2x3) screw that secures the metal bracket to the WWAN card [1].
2. Remove the metal bracket [2] and disconnect the antennae cables from the connectors on the WWAN card [3].
3. Remove the WWAN card from its connector on the system board [4].
32
Removing and installing components