Table of Contents
Advertisement
SECTION 4: OPERATING INSTRUCTIONS
TheraSound Amp - Troubleshooting
1. Basic Troubleshooting
• Ensure that the music source's volume is turned up and mute is not enabled.
• If you have an internal equalizer on your musical device, ensure that the balance is set equally
between Left and Right,
• Ensure that your mp3 player or music source is plugged into the "INPUT" socket on the front
of the TheraSound Amp (see section, figure image)
2. I can't feel the resonation
• Adjust the left knob on the left side of the Amp to control the vibration levels of the
SoundHearts.
• Check to see if the blue light is on (front of amp).
• If you have the 3.5mm cable plugged in, you will not hear anything from the USB. Unplug the
cable to hear the music on the USB.
3. I can only feel the resonation on one side of the lounger
• Check that the balance of your musical device is balanced equally between left and right, and
forward and backward if applicable
4. I can't hear anything out of my external speakers or headphones
• Adjust the right knob on the right of the Amp to control headphone or external speaker
volume
• Adjust the volume of your external speakers
• Check that the balance of your musical device is balanced equally between left and right.
5. I can hear music through my headphones or speakers, but the vibration from the lounger is
very weak or distorted
• The bonus music that came with your lounger was specially created to resonate with the
SoundHearts within the platform. Due to different levels of studio production and recording
quality, some music that may "sound" good, may not "resonate" as well out of the SoundHearts.
But don't be dismayed, you may find that music that you may not normally "listen" to, feels
unbelievable when coming through the SoundHearts.
• Check that the balance of your musical device is balanced equally between left and right, and
forward and backward if applicable
• Adjust the resonance with the left knob on the So Sound Amp
• Try using a non MP3 format. Try using the standard to all Cds (.wav) or a non-compressed
audio format.
• Make sure the output from your player is on high (about 8 out of 10) but not so much as to
distort the sound.
Warranty
SoundHearts and Amp – 1 (One) Year Limited
The TheraSound components are not user-serviceable. Opening either the TheraSound Amp or
any of the TheraSound components voids all warranties
8
SECTION 4: OPERATING INSTRUCTIONS
Mind-Sync Operating Instructions (Optional)
The Mind-Sync system deploys binaural beats, gamma sound waves, and acoustic resonance
therapy. Full spectrum sound waves resonate through four channel high fidelity transducers
mounted strategically in the chair frame to achieve unprecedented levels of stress reduction
and cellular level harmonic synchronization.
Scientifically proven Vibro-Acoustic Therapy reduces stress and promotes relaxation – harmonic
resonant waves are directed along the Vagus nerve line, which links to the para-sympathetic
control system of the heart, lungs, and digestive tract. Numerous medical studies have proven
the effectiveness of this stress reduction treatment.
Mind-Sync Initial Setup
1.
Put together tablet stand.
2.
Locate power cable under the right side of the seat.
3.
Connect the cables to the tablet (per diagram).
4.
Plug headphones into jack on side of chair.
5.
Plug in power cable of chair into 110V outlet.
9
Advertisement
Table of Contents
