Section 3: Installation; Moving Your Table; Leveling Instructions; Weight Capacity - Lec Tides La Mer User Manual

SECTION 3: INSTALLATION

Your Tides La Mer table comes completely assembled and ready to use.
Once the table is unpacked, follow the "Moving Your Table" instructi ons below.

Moving Your Table

Lift your table by grasping fi rmly from the bott om of the metal frame underneath the
upholstered top. Do not try to lift from the upholstered top.
Basic Setup Instructions
Once your Tides La Mer table is positi oned for use, follow these steps:
• Charge the batt ery - see instructi ons on next page
• Place the foot control in a locati on where it is safe and accessible.
• Ensure the foot control is not in danger of being crushed by the lift mechanism.
• Follow the "Leveling Your Table" instructi ons below
Leveling Your Table
Leveling, or balancing, your table is very important during initi al setup and routi ne maintenance.
Your Pedestal table is equipped with leveling feet that can adjust to uneven fl oors.
To adjust the leveler feet:
1. Place the table in the positi on you plan to use it.
2. To determine which foot needs adjusti ng, att empt to "rock" your table. If there is any
movement, the leg that is lift ing is the one that will need adjusti ng.
3. Raise table height approximately 6 inches.
4. Using your hand, or a wrench if necessary, turn the leveling foot in the needed directi on.
(Counterclockwise will lower the overall height, clockwise will raise the overall height)
Weight & Lift Capacities
600 lbs.
NOTE: A fully charged batt ery will give approximately 40 full lift s/lowers for the column.
4
Your table is very heavy - extreme cauti on should be used to avoid injury
to yourself, others around you, and your table. DO NOT lift or move
without using proper safety procedures/equipment. DO NOT turn the
table on its side for any reason.
The Tides La Mer is powered by a heavy-duty electric lift column.
The recommended lift capacity is 600 lbs.