Section 3: Operating Instructions; Moving Your Lounger; Basic Setup; Electrical Specifications - Lec NuWave User Manual

Lounger
Table of Contents

Advertisement

SECTION 4: OPERATING INSTRUCTIONS
Your NuWave Lounger comes completely assembled and ready to use.
Once the lounger is unpacked, follow the "Moving Your Lounger" instructions below.

Moving Your Lounger

Your NuWave Lounger is very heavy - extreme caution should be used to
avoid injury to yourself, others around you, and your lounger. DO NOT lift
or move without using proper safety procedures/equipment.
Basic Setup Instructions
Once your NuWave Lounger is positioned for use, follow these steps:
If applicable, plug the power cord into a grounded outlet that is properly rated.
If applicable, arrange and secure the power cord so it will not create a tripping hazard.

Electrical Specifications

Spec
North America
Input Voltage
Input Frequency
Consumption - TheraSound
Consumption - Lamp
Consumption - MindSync
Consumption - Relaxor
6
Europe/Asia
120 VAC
220 VAC
60 Hz
50 Hz
1A
.56A
.5A
.28A
1.25A
.63A
4A
2A
SECTION 4: OPERATING INSTRUCTIONS
TheraSound Amp Operating Instructions (Optional)
The TheraSound Amp is the proprietary amplifier used to power your SoundHearts. It has been
specially designed to work with almost any musical device, and to deliver the deep, resonating
tones and harmonies that are so beneficial to a relaxing experience.
Never force the connection between your phone/music player and the
TheraSound Amp. The correct cable connection is standard on most devices,
should never require forced pressure to complete.
Resonance
volume
Start/stop
control
USB player
Input from
On/Off
your USB
switch
player
Volume/Resonance Control
The resonance knob should not have to be more than half way (11-12:00 o'clock position) or
distortion will be a problem. The status light will turn green when the system is in distortion
and you will hear a popping sound.
Using a Phone or Player
If you want to use a phone or another player, plug in the 3.5mm male-male cable into
the headphone output of your phone and plug in the other end into the front of the amp
labeled "INPUT".
Since the TheraSound System uses magnets in the SoundHearts, people with
pacemakers or any other implanted magnetically-sensitive medical device
should consult with a doctor before lying on a table with this system.
The TheraSound system has no user-serviceable parts. Never attempt to
open or repair the TheraSound System.
USB slot
Headphone
Next
volume
track
control
Status
Output to
light
headphones
or powered
stereo
speakers
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nuwave sL100277L100276

Table of Contents