Battery System
1.
Plug the wall charger into a properly rated outlet. The "On" indicator light will turn
green when the charger is properly connected.
2.
Place the batt ery on the charger. The "Charge" indicator light will turn yellow to confi rm
the batt ery is charging. (Note: charging ti me is approximately 5 hours)
3.
Install the batt ery on the table. (The receiver is at the foot end of your table.)
Battery Charger - Electrical Specifi cations
Spec
Input Voltage
Input Frequency
Charging current
Foot Control Operation
Your foot control is already connected and ready for use. The foot control allows you to
simply raise and lower the table, allowing convenient hands-free adjustments.
Lower Entire Table
SECTION 4: OPERATING INSTRUCTIONS
North America
up to 650 mA
"On" Indicator Light
"Charge" Indicator Light
120 VAC
60 Hz
Europe/Asia
220 VAC
50 Hz
Raise Entire Table
5