Movement Sensor; System Lock; Miele@Home - Miele CVA 7845 Operating And Installation Instructions

Settings

Movement sensor

The movement sensor detects when
you approach the touch display with
your hand or body. You can activate the
following functions individually:
- Switch the light on: You can decide
whether the light should come on
when the coffee machine is on or off.
- Acknowledge buzzer: Buzzer
sounds are suppressed, e.g. in the
event of the message
the water container
- Switch the appliance on: The start
screen is displayed.
The movement sensor is deactivated by
default.
If you want the movement sensor to
respond even when the coffee
machine is switched off, activate
QuickTouch as well (
| ).
QuickTouch On
When the system lock is activated, the
movement sensor functions are
deactivated.
System lock 
You can lock the coffee machine to
prevent it being used without your
knowledge, by children, for example.
58
Fill and replace
.
Display |
When the system lock is activated, the
settings for the
On at
movement sensor are deactivated.
The coffee machine will not switch on
at the set time and/or will not respond
to movement when someone
approaches it.
Temporarily deactivating the system
lock 
 Touch the display for 6 seconds.
The system lock is reactivated when the
coffee machine is next switched off.

Miele@home

The following options may appear
under Miele@home:
- Set up: This option only appears if
the coffee machine has never been
connected to a WiFi network or if the
network configuration has been reset.
- Deactivate*/Activate*: The settings
for the WiFi network are retained, but
the network is switched on or off.
- Connection status*: Information
about the WiFi connection is
displayed. The symbols indicate the
strength of the connection.
- Set up again*: The settings for the
current WiFi network will be reset.
The WiFi connection will be set up
from scratch.
- Reset*: The WiFi is switched off and
the settings for the current WiFi
network will be reset.
timer and the