Ringer Setting; Own Greeting - Siemens ME75 Operating Manual

44 Setup
Screensaver
The screensaver shows a picture in
the display when a period of time set
by you has elapsed. An incoming call
and pressing any key will end the
function except if the safety function
is activated.
Note
The Digital clock
phone standby time.
Startup anim.
Shown when the phone is
switched on.
Shutdn anim.
Shown when the phone is
switched off.

Own greeting

Is displayed instead of an animation
when you switch on the phone.
Big letters
You can choose between two font
sizes for the display.
Illumination
Set display light brighter/darker.
screensaver reduces the
Ringtones
¢ ¢
Ringtones
C
T
¢
Select function.
Set the tones on the telephone to
suit your requirements.

Ringer setting

Activate/deactivate the ringer or re-
duce it to a short beep.
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The vibration alarm can be
switched on in addition to the ring
tone. This function is deactivated
when the battery is being loaded
and accessories are connected
(except the headset).
Volume
Set different volumes for types of
call/functions.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Allocate ringtone
A ringtone which has already been
selected will be played or the list of
possible ringtones will be displayed
for selection.