Table of Contents
Advertisement
¢
¢
Security
C
T
¢
Select function.
Change PIN2
(Display only if PIN2 is available)
Proceed as with
Chg.phonecode
(Change phone code)
You define the phone code (4–8 dig-
its) when you call up a phone-code
protected function for the first time
(e.g.
call, page 49). It is then
Direct
valid for all phone-code protected
functions.
Following the third unsuccessful at-
tempt, access to the phone code and
the functions that use it is denied. If
this occurs, contact the Siemens
Service (page 59).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instruc-
tions. If the PUK (MASTER PIN) has
been lost, please contact your
service provider.
¢
PIN codes
Change
PIN.
Preventing accidental
activation
Even if PIN use is deactivated
(page 14) confirmation is required
to switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
Press and hold.
B
Press this key. The phone
§OK§
switches on.
Press this key or take no
§Cancel§
action. The phone does
not switch on.
Connecting to PCs
You can connect the phone to a PC
via infrared or a data cable (accesso-
ries). With the MPM program
(Mobile Phone Manager) you can
save data from the phone onto your
PC. Copying your addressbook en-
tries from Outlook®, Lotus Notes™
and other Siemens phones (includ-
ing Gigasets) is also supported. You
can download Mobile Phone Manag-
er from the following website:
www.siemens.com/me75
Security
15
Advertisement
Table of Contents
