Table of Contents
Advertisement
Available languages
Available languages
Maintenance
Pump filter
It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A clogged
pump filter may reduce the bubble effect.
NOTE
If the pump filter is clogged, an information code of "5C" appears on the screen.
CAUTION
• Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may
cause a leak.
• Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an
operational failure or a leak.
36 English
WW80J3263KW1_DC68-03612W-EN.indd 36
1. Turn off the washing machine, and
2. Drain the remaining water inside the
3. Gently press the top area of the filte
4. Turn the pump filter knob to the left, and
5. Clean the pump filter using soft brushes.
6. Reinsert the pump filter, and turn the
B
B
• Some pump filters feature a safety knob
• To close the safety knob of the pump
unplug the power cord.
drum drum. See the "Emergency drain"
section.
cover to open.
drain off the remaining water.
Make sure the drain pump propeller
inside the filter is unclogged.
filter knob to the right.
NOTE
that is designed to prevent accidents
by children. To open the safety knob
of the pump filter, push in and turn it
anticlockwise. The spring mechanism of
the safety knob helps open the filter.
filter, turn it clockwise. The spring makes
a rattling sound, which is normal.
2018/8/16 9:09:40
Advertisement
Table of Contents
