Table of Contents
Advertisement
Available languages
Available languages
Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
STEP 6 Power on
Plug the power cord into a wall socket featuring an AC 230 V / 60 Hz approved electrical
outlet protected by a fuse or circuit breaker. Then, press Power to turn on the washing
machine.
22 English
WW80J3263KW1_DC68-03612W-EN.indd 22
Over the edge of a wash basin
The drain hose must be placed at a height
of between 60 cm and 90 cm (*) from the
floor. To keep the spout of the drain hose
bent, use the supplied plastic hose guide (A).
A
Secure the guide to the wall using a hook to
ensure stable drainage.
ln a sink drain pipe
The drain pipe must be above the sink
siphon so that the end of the hose is at least
60 cm above the floor.
ln a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use
a 65 cm high vertical pipe. Make sure the
drain hose is connected to the stand pipe at
a slant.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of
60 litres per minute
2018/8/16 9:09:37
Advertisement
Table of Contents
