Selecting/Displaying Patterns According To The Embroidery Frame Size - Brother 888-L91 Operation Manual

To change the center mark and grid lines
a
1 Center mark
2 Grid lines
c
Press to return to the original screen.
Selecting/displaying patterns according to
the embroidery frame size
If "Embroidery Frame Identification View" in the settings
screen is set to "ON", the pattern can be edited in the screen
as if that embroidery frame is attached.
When "Embroidery Frame Identification View" is set to
"OFF".
1
2
1 The embroidery frames that can be used with the
selected pattern are displayed.
2 The embroidering area for the large/extra large
(multi-position) frame is displayed.
When "Embroidery Frame Identification View" is set to
"ON".
b
Making Embroidery Adjustments
1
2
3
1 The embroidery frame selected when "Embroidery
Frame Identification View" is set to "ON" is highlighted.
2 The embroidering area for the selected frame is
displayed.
3 Patterns that will not fit in the selected frame appear
shaded and cannot be selected.
Memo
• Patterns that cannot be sewn in the selected
embroidery frame will not be available in the
pattern selection screen.
• The pattern will be enlarged or reduced within the
embroidering area for the selected embroidery
frame.
• When enlarging the pattern by pressing
the editing screen, it is enlarged to 100% of the
size for the selected embroidery frame.
• The "Embroidery Frame Identification View"
function is canceled when the key for the selected
embroidery frame (Example:
• To change the embroidery frame selected with the
"Embroidery Frame Identification View" function,
press the key for the desired embroidery frame.
on
) is pressed.
Embroidering E-29
E