National Instruments PXIe-4464 Getting Started Manual
Dsa analog input
Hide thumbs
Also See for PXIe-4464:
- Calibration procedure (19 pages) ,
- Getting started manual (12 pages)
Table of Contents
Advertisement
Quick Links
GETTING STARTED GUIDE
NI PXIe-4464
DSA Analog Input
This document explains how to install, configure, and set up the NI PXIe-4464 Dynamic Signal
Acquisition (DSA) analog input module. Driver support for the NI PXIe-4464 was first available
in NI-DAQmx 9.9.1. For the list of devices supported by a specific release, refer to the
NI-DAQmx Readme, available on the version-specific download page or installation media. To
download NI-DAQmx 9.9.1, visit
and enter the Info Code
. The
ni.com/info
PXIE4464
NI PXIe-4464 is available with BNC connectors or Mini-XLR connectors.
Contents
Electromagnetic Compatibility Guidelines .............................................................................. 1
Unpacking................................................................................................................................. 2
Preparing the Environment ....................................................................................................... 2
Verify the Kit Contents............................................................................................................. 3
Other Equipment....................................................................................................................... 3
Install the Software ................................................................................................................... 3
Install the Hardware.................................................................................................................. 4
Configure the Hardware in MAX ............................................................................................. 5
Connect a Signal Source to the NI PXIe-4464 ......................................................................... 6
Environmental Management..................................................................................................... 7
Worldwide Support and Services ............................................................................................. 7
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with radio
and television reception and prevent unacceptable performance degradation, install and use this
product in strict accordance with the instructions in the product documentation.
Advertisement
Table of Contents
Related Manuals for National Instruments PXIe-4464
Summary of Contents for National Instruments PXIe-4464
-
Page 1: Table Of Contents
NI PXIe-4464 DSA Analog Input This document explains how to install, configure, and set up the NI PXIe-4464 Dynamic Signal Acquisition (DSA) analog input module. Driver support for the NI PXIe-4464 was first available in NI-DAQmx 9.9.1. For the list of devices supported by a specific release, refer to the NI-DAQmx Readme, available on the version-specific download page or installation media. -
Page 2: Unpacking
(HI). However, for functional reasons, there is no input configuration of the NI PXIe-4464 that directly connects the LO terminal to the chassis ground. Without a direct connection to chassis ground, the outer conductor does not act as a shield for unwanted noise and may act as an antenna for coupling noise into the module inputs. -
Page 3: Verify The Kit Contents
Install the Software Software support for the NI PXIe-4464 is provided by NI-DAQmx. The DAQ Getting Started Guide, which you can download at , offers step-by-step NI-DAQmx ni.com/manuals instructions for installing software and hardware, configuring channels and tasks, and getting started developing an application. -
Page 4: Install The Hardware
Align the NI PXIe-4464 with the card guides on the top and bottom of the selected slots. Hold the injector/ejector handle down as you slowly slide the module into the chassis until the handle catches on the injector/ejector rail, as shown in Figure 1. -
Page 5: Configure The Hardware In Max
10. Tighten the top and bottom module mounting screws, shown in Figure 2, to 0.31 N · m (2.7 lb · in.) on the top and bottom of the module front panel to secure the NI PXIe-4464 to the chassis. -
Page 6: Connect A Signal Source To The Ni Pxie-4464
Connect a Signal Source to the NI PXIe-4464 Figure 2 shows the front panel connections of the NI PXIe-4464 with BNC connectors and the NI PXIe-4464 with Mini-XLR connectors. Note Refer to the NI PXIe-4464 Specifications for information about the operating input range and overvoltage protection. -
Page 7: Environmental Management
1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the Worldwide Offices section of to access the branch office websites, which ni.com/niglobal provide up-to-date contact information, support phone numbers, email addresses, and current events. NI PXIe-4464 Analog Input Getting Started Guide | © National Instruments | 7... - Page 8 NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS.