Siemens CX70 Operating Manual page 10

Changing CLIPIt™
covers
You can use CLIPIt™ covers (accesso-
ries) to adjust the appearance of
your phone according to your per-
sonal taste.
Please switch the phone off before
changing the keypad mat or
faceplate.
Dismantling the phone
Remove battery cover (see p. 7). To
remove the faceplate, insert the lug
on the battery cover into the open-
ing and open the lock by simultane-
ously applying slight pressure
turning the lug
2
1
1
2
.
Assembling the phone
Remove the old keypad mat and
insert the new keypad mat
the faceplate. Take care that it is cor-
rectly positioned.
3
Insert the phone into the bottom of
and
the faceplate
carefully until it clicks into
position
4
CLIPit™ Covers
The new keypad has an additional key
beneath the joystick to permit direct access
to the Internet information from the service
provider.
Getting started
4
and then push it in
5
.
5
9
3
into