Table of Contents
Advertisement
SAR
European Union (RTTE) and
international (ICNIRP)
INFORMATION ON RF EXPOSURE/SPECIFIC
ABSORPTION RATE (SAR)
THIS MODEL MEETS INTERNATIONAL
GUIDELINES FOR EXPOSURE TO RADIO
WAVES
Your mobile device is a radio transmitter and re-
ceiver. It is designed not to exceed the limits for ex-
posure to radio waves recommended by
international guidelines. These guidelines were de-
veloped by the independent scientific organization
ICNIRP and include safety margins designed to as-
sure the protection of all persons, regardless of age
and health.
The guidelines use a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR
limit for mobile devices is 2 W/kg and was adopted
into the European Standard EN 50360 and into oth-
er national standards. The CE mark demonstrates
that the EU requirements are met.
The highest SAR value for this device when tested
at the ear was 0.67 W/kg
a range of functions, they can be used in positions
other than the head, such as directly on the body.
In this case, the limits are met too.
As SAR is measured utilizing the device's highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses the
minimum level required to reach the network.
The World Health Organization has stated that
present scientific information does not indicate the
need for any special precautions for the use of mo-
bile devices. They note that if you nevertheless
want to reduce your exposure then you can do so
by limiting the length of calls or using a 'hands-free'
device to keep the mobile phone away from the
head and body.
1 The tests are carried out in accordance with in-
ternational guidelines for testing.
1
. As mobile devices offer
Additional Information can be found on the web-
sites of the World Health Organization
(www.who.int/emf)
or Siemens
(www.siemens.com/mobilephones).
Guarantee certificate
(UK)
Without prejudice to any claim the user (customer)
may have in relation to the dealer or retailer, the
customer shall be granted a manufacturer's
Guarantee under the conditions set out below:
• In the case of new devices and their compo-
nents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at its
own option and free of charge, either replace
the device with another device reflecting the
current state of the art, or repair the said device.
In respect of parts subject to wear and tear
(including but not limited to, batteries, keypads,
casings, small parts on casings, protective cov-
erings where included in the scope of delivery),
this warranty shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if the device de-
fect is attributable to improper treatment and/or
failure to comply with information contained in
the user manuals.
• This Guarantee shall not apply to or extend to
services performed by the authorised dealer or
the customer themselves (e.g. installation, con-
figuration, software downloads). User manuals
and any software supplied on a separate data
medium shall be excluded from the Guarantee.
• The purchase receipt, together with the date of
purchase, shall be required as evidence for in-
voking the Guarantee. Claims under the Guar-
antee must be submitted within two months of
the Guarantee default becoming evident.
• Ownership of devices or components replaced
by and returned to Siemens shall vest in
Siemens.
12
Advertisement
Table of Contents
