Safety Precautions - Vector Fog DC20P User Manual

01
www.vectorfog.com
SAFETY
PRECAUTIONS
The battery charger is for AC 110V — 240V power supply/60Hz.
1
Unplug the charger after the battery is fully charged (green light).
Do not use any damaged power cord, plug, charger or socket.
2
Do not touch the plug, charger or switch with wet hands.
3
The charger is not waterproof. Do not use or store this at humid atmosphere
4
or wet places.
Do not charge or store the machine over 95°F (35°C) or under 50°F (10°C).
5
Do not expose and use the machine over 104°F (40°C).
Do not drop, heat, cut, or disassemble the machine.
6
Do not use the machine close to combustible or inflammable materials.
7
8 When using the machine inside vehicles, secure the position of the machine to
prevent electric shocks and chemical teaks.
9 Please wear safety equipment (mask, anti-contamination clothing, gloves, etc.)
while using noxious material.
Do not inhale the cold fog generated from the machine. The micro-droplets
10
produced by this machine can float in the air for a long time and are quickly
absorbed by the lungs. Depending on the chemical being used, this could result in
serious injuries or death.
Only use the designated charger to charge the battery.
11
Do not fill in the solution tank while charging the battery.
12
Do not disassemble, modify, or alter the charger and the machine.
13
Modifications or alterations will invalidate the warranty.
Do not lean the machine on its side with chemical inside the tank.
14
This can cause chemical leaks resulting into faulty machine.
Do not fill the solution tank with powder, viscous liquid and flammable solution
15
such as strong acid, strong alkaline, petrol, etc.
16 If the machine or the charger is faulty, please contact the supplier.